Fire Lite IGU


FireLite® IGU Fire-Rated Insulated Glass Units
Fire protection meets energy performance – FireLite® glass ceramic built into an insulated glass unit.
FireLite® IGU pairs a FireLite glass ceramic product with tempered or annealed float glass in a sealed insulated unit. It is designed for exterior openings where energy codes call for insulated glazing, and for interior spaces with special requirements such as sound control.
Depending on the make-up, units can be fire-rated, or fire and impact safety-rated. To reach a 3-hour rating, the unit must be specified with FireLite® NT or FireLite Plus®.
KEY FEATURES & BENEFITS
- Up to 3 hours – Fire-rated up to 180 minutes with the required hose stream test (3-hour units use FireLite NT or FireLite Plus).
- Impact safety options – Meets ANSI Z97.1 and CPSC 16 CFR 1201 (Category I and II) when built with an impact-rated make-up.
- Energy efficient – Insulating performance comparable to a standard 1/4" – 1/2" air – 1/4" float unit.
- Standard 1" unit – Typical 1" thickness fits Fireframes® Designer Series or any standard fire-rated frame; other thicknesses available.

- Design flexibility – Can incorporate tinted, art glass, one-way mirror, Low-E, reflective or lead (x-ray) glass, among others.
- ultraHD® clarity; Premium or Standard grade – Clear, wireless glass ceramic with improved surface quality.
- Durable – Withstands thermal shock; large sizes available; may be lightly sandblasted or etched on one side without affecting the rating.
- Warranty – 10-year limited warranty.
Performance at a Glance
Fire-rated
Hose stream tested
Positive pressure tested
UL classified and labeled
Ratings & Specifications
Property
Typical unit thickness
Fire rating
Impact safety rating
U-value
STC – 3/16" FireLite / 9/16" air / 1/4" float
STC – 3/16" FireLite NT / 9/16" air / 1/4" float
STC – 5/16" FireLite Plus / 9/16" air / 1/4" float
Value
1" (other thicknesses available)
Up to 3 hours (3-hour make-ups require FireLite NT or FireLite Plus)
Meets ANSI Z97.1 and CPSC 16 CFR 1201 (Cat. I and II) – impact-rated make-ups
Comparable to a 1/4" float – 1/2" air space – 1/4" float unit: approx. 0.55 summer / 0.49 winter*
Approx. 35**
Approx. 35**
Approx. 35**
* U-values change when high-performance float glass is used. ** Values achieved with these specific make-ups.
Listings & Maximum Sizes
Classified and labeled by Underwriters Laboratories Inc.® and Underwriters Laboratories of Canada (UL File No. R13377).
Fire rating
20 – 60 min.
20 – 60 min.
20 – 60 min.
90 min.
90 min.
90 min.
3 hours
Assembly
Doors (non-temperature-rise)
Doors (temperature-rise)
Other than doors
Doors (non-temperature-rise)
Doors (temperature-rise)
Other than doors
Doors
Max. exposed area (in² / ft²)
3,204 / 22.25
100 / 0.69
3,325 / 23.09
2,034 / 14.13
100 / 0.69
2,627 / 18.24
100 / 0.69
Max. exposed width(in.)
36
12
95
36
12
56-1/2
12
Max. exposed height (in.)
89
33
95
56-1/2
33
56-1/2
33
Individual lites may not exceed the maximum exposed area shown. Confirm maximum tested glass sizes and required stop height with the frame manufacturer. For general reference only – confirm current listing details before specifying.
Tested To
UL 9 · UL 10B · UL 10C · NFPA 80 · NFPA 252 · NFPA 257 · CAN/ULC-S104 · CAN/ULC-S106 · LARR 25798
Surface Grades & Appearance
FireLite glass ceramic has a slightly warmer, earthier tone than ordinary float glass (which reads blue-green). Once it is glazed into a frame, the difference is barely noticeable. ultraHD® Technology further improves colour, clarity and surface quality. Because grades look different side by side, we recommend reviewing physical samples before you specify – contact us to arrange.
- Premium Grade – Both faces are ground and polished for the best surface quality and optical clarity in the FireLite range – the benchmark finish for fire-rated glass ceramic.
- Standard Grade – A polished finish on par with competing fire-rated ceramics that are sold as "premium" – a cost-conscious choice where the highest clarity isn't critical.
- Obscure Grade – A patterned surface for locations where privacy matters more than a clear view.
Where to Use FireLite IGU
- Exterior windows and storefronts where energy codes require insulated glazing
- Exterior fire-rated doors and sidelites (impact-rated make-ups)
- Interior spaces needing sound reduction
- Specialty make-ups: tinted, Low-E, reflective, one-way mirror, art glass, lead (x-ray) glass

Good to Know
FireLite IGU is not a barrier to radiant heat and does not meet ASTM E119 or UL 263. Where a heat-barrier product is required, see Pilkington Pyrostop®.

Why Work With Precision Glass?
From our Thornhill, Ontario facility, Precision Glass Services Inc. provides fire-resistant glass solutions that protect people and property, working with architects, contractors, glaziers and building owners. We help you match the right FireLite® or Pilkington Pyrostop® product to your opening, fire rating and code requirements.
- Help selecting the right product for your fire rating, location and impact-safety needs
- Guidance on compatible fire-rated frames and door assemblies
- Technical data and product documentation on request
- Local support from our Thornhill, Ontario office
Call (905) 731-7800 · Fax (905) 709-4437 · 2 Essex Avenue, Unit 3B, Thornhill, Ontario L3T 3Y8
Resources
FireLite web tools, fact sheets and CSI specs: https://www.fireglass.com/distributor-marketing/